Pentair EasyTouch 8 and 4 User Manual download pdf (Page 25)

EasyTouch Load Center Installation Guide

Connecting the IntelliChlor Cell

The following connection instructions are for the optional IntelliChlor electronic chlorine generator

(model IC20 and IC40). After the IntelliChlor cell unit has been installed, connect the cell power cable

to EasyTouch load center.

To connect the IntelliChlor power cable to the EasyTouch load center:

1. Align the four pins of the IntelliChlor cell power connector with the socket on the bottom of

the EasyTouch load center enclosure and insert the connector into the socket.

2. Rotate the socket nut until it locks the connector in place. Do not over tighten the nut (hand

tighten only).

Connector socket nut

To IntelliChlor cell

Lower left corner of

EasyTouch load center

1 2 ... 20 21 22 23 24 25 26 27 28 29 30 31 32

No comments

Pentair EasyTouch 8 and 4 User Manual Page 25